Subfloor Preparation – Patching Compounds

[All Manufacturer Products]

ARDEX FEATHER FINISH ARDEX FEATHER FINISH® Self-Drying, Cement-Based Finish Underlayment - ARDEX FEATHER FINISH provides a smooth, permanent finish to a variety of substrates prior to the installation of today’s demanding floor coverings such as sheet vinyl and VCT. ARDEX FEATHER FINISH allows the installation of most floor covering in as little as 15 minutes over concrete, wood, ceramic, and quarry tile – all without priming or the use of a latex additive.
ARDEX FORTI FINISH ARDEX FORTI FINISH™ High Strength, Self-Drying Finishing Underlayment – A strong, durable, and fast-setting finishing patch that is especially suited for the high traffic, heavy loads and hard wheels associated with gurneys and patient beds in hospitals and other health care facilities. A self-drying cement-based polymer modified, trowel grade underlayment that provides a smooth, highly durable finish for use over concrete substrates prior to the installation of vinyl and other floor coverings in the most demanding environments. Developed specifically for use in hospitals where heavy, rolling loads are common, ARDEX FORTI FINISH allows for the installation of most types of floor coverings in as little as 15 to 30 minutes over concrete and prepared adhesive residues on concrete.
ARDEX GPS GENERAL PATCH & SKIMCOAT

ARDEX GPS™ GENERAL PATCH & SKIMCOAT - ARDEX GPS™ GENERAL PATCH & SKIMCOAT is a trowelable patch and skimcoat for use over interior concrete, wood, ceramic tile, and cutback and other non-water soluble adhesive residues on concrete. ARDEX GPS can also be used over vinyl composition tile (VCT) and as embossing filler for residential sheet vinyl when mixed with ARDEX E 25 Resilient Emulsion. ARDEX GPS will provide a permanent, smooth, durable finish prior to the installation of residential and most commercial floor coverings. ARDEX GPS hardens quickly, is easy to apply, dries fast without shrinking, cracking or spalling, and does not need to be sanded.

ARDEX SD-P ARDEX SD-P® Self-Drying, Fast Setting Concrete Underlayment – For smoothing and repairing of concrete floors, ramps, stairways, as well as non-porous substrates such as terrazzo, ceramic & quarry tile prior to the installation of floor covering. When installing over standard absorbent concrete, no priming is required. ARDEX SD-P sets quickly so that a smooth, steel-troweled surface can be obtained readily. The finished surface hardens rapidly permitting the installation of most common floor coverings to proceed immediately – no additional drying time is required. Using advanced Portland cement chemistry with a self-drying matrix, ARDEX SD-P is ideal for patching and reaches a compressive strength of 4,200 psi.
ARDEX EB 2 ARDEX EB 2™ Fast Setting Screed Cement – A fast-setting, polymer-modified, Portland cement-based, hydraulic cement for producing bonded, un-bonded, or floating screed beds for use with all types of flooring systems. ARDEX EB 2™ can be installed on interior and exterior surfaces in three screed mix configurations. Depending on the installation configuration, ARDEX EB 2 can receive tile in as little as 3 hours and most other floor coverings in just 24 hours.

ARDEX SKM ARDEX SKM™ Skimcoat Patch & Finishing Underlayment – ARDEX SKM Skimcoat Patch & Finishing Underlayment is a trowelable patch and skim coat for use over interior concrete, wood, ceramic and quarry tile, cutback and other non-water soluble adhesive residues on concrete. ARDEX SKM will provide a permanent, smooth, durable finish prior to the installation of most floor coverings. ARDEX SKM hardens quickly, is easy to apply, dries fast without shrinking, cracking or spalling, and does not need to be sanded.
ARDEX MRP

ARDEX MRP™ Moisture Resistant Patch – ARDEX MRP is a trowel-grade, cementitious patching and smoothing compound for filling and repairing heavily profiled indoor concrete on all grade levels prior to the installation of ARDEX Moisture Control Systems. Engineered with Portland cement and select high performance polymers, ARDEX MRP bonds readily to concrete surfaces and is completely moisture resistant. It is easy to apply, hardens quickly, and produces a surface finish that is suitable for the installation of ARDEX Moisture Control Systems without having to re-profile the surface of the patch after it is installed. ARDEX MRP is recommended for commercial and residential applications.